Monday, August 26, 2013

Repair Your Clicking Hard Drive

Dealing with the computers is not an easy job. When you are working on your computer, you must be careful in using it in case you have no idea about it works. Because in that case it can prove to be a difficult job for you in order to make it all right on your own. There come times when your hard drive starts clicking and does not respond properly. What should you do about it is a question that many people need an answer for. Here we will give you the right answer for the justified question. By the answer, you would know what you have to do with your clicking hard drive.

When you have got a clicking hard drive then most of the people try to open it and repair it or else just do this and that to try to fix it. But this is a very wrong way of dealing with the problem. If you turn on your computer and your hard drive does not respond and makes clicking sounds in the stead then you should do only one thing. You should turn off your computer right away. When you would do this, you do not need to open and fix your clicking hard drive. Just restart the computer and it would work well. If it does not work even then, you should send it to professional to check on your computer so that no other damage is done.

Handling A Clicking Hard Drive

The motherboard, processor as well as the hard drive can be ranked as the most crucial parts of the computer. The hard drive is in charge of storage of programs installed in the system as well as the files that you may have saved in your machine. When the drive breaks down, the computer user is normally inconvenienced in a huge way. When you notice a computer developing the problem of a clicking hard drive, there is need to take prompt action to back up your data as well as know what could be the cause of the problem.

First, you need to establish that it is indeed the drive that is coming with the noise problem. The fan, for example, can be confused for the hard drive. After this has been ascertained, you will need to know what is causing the clicking sound before the drive dies down on you and caused you much inconvenience. There are a number of ways of knowing the cause of a clicking hard drive. Disk clean-up tools as well as error checker are some of the programs found over the internet which can be used to determine the cause of the clicking hard drive.

Monday, August 19, 2013

Some Causes Of Noises From The Computer

When using your computer, there are a number of signs that could warn you of an impending failure. A clicking hard drive is understood by many people as a sign that the hard drive of a computer may be working under compromised conditions. Sometimes, however, the clicking sound may in real sense be quite harmless. Mechanical problems with the drive will usually cause these sounds and can ultimately lead to its breakdown. This is one of the most sensitive parts of your computer and clicking sound from it should be taken as a warning message. This is a storage location which hosts several of the important documents that people have. Perhaps this explains why a clicking sound from a computer almost always elicits a measure of fear in the user of the machine.

You might need to remember that there are other parts of the computer which might cause the clicking sounds. The optical drive and fan of the computer may sometimes click and confuse one to be an impending problem with the drive. When you have clearly ascertained that the noise produced is indeed from a clicking hard drive, you might need to take precautions to back up all your important files. For more info http://www.harddrivedatarecovery.org/

What To Do When You Hear A Clicking Hard Drive

Usually during the use of your computer, you may begin to hear the clicking hard drive. Whereas sometimes it may be other parts of the machine producing this noise, it is important that you ascertain early enough the best course of action. The fan and even optical drive may cause clicking sounds to be heard when the computer is running. You will need to ascertain first and foremost that indeed it is the hard drive that is making these noises. After you have ascertained where these noises are coming from, you would need to determine a course of action.

First, it definitely is important to note that when you perceive a clicking hard drive, there may be developing problems with this storage location. It might be a signal that soon, the drive will break down. This is one of the most important and sensitive parts of the computer. This is basically because of the fact that it is a storage location that holds most if not all of your important documents. When you perceive the clicking sounds, you may need to start keeping back-ups for the same. This will save you from the prospects of spending time and money trying to get restoration of your data.

Saturday, August 10, 2013

Importance Of Data Backup In A Business

A record of business transactions is very important to establish if the business is running at a profit.  Loss of office data can paralyze the operations of a business for many hours until it is recovered. It is important to have a backup plan for your data off site in case you lose the data stored in your office. RAID 10 recovery is used in many offices for data storage. Customer database is very important as it shows the customer’s shopping history. This data enables a business owner to introduce products into the market to satisfy the customers and make profits for the business.

When a business enlarges, it becomes necessary to move to new premises. Data migration is required to ensure that all information is accessible in the new offices. RAID 10 recovery is useful in data migration.  All employees must be taught the importance of data backup. A fire can burn down a building and destroy the data stored in the premises; data recovery will be necessary for a business to get back on its feet. A business requires adequate tools to run well; it is important to get a profession to network your computer systems and monitor your data backup.

Getting RAID 0 From RAID 10 Member Disks

In several quarters, RAID 10 is referred to as RAID 1+0. Usually, it makes use of four drives in the least. If you would like to know the total storage capacity of the array, you need to add that storage capacities of all those drives used by the array divided by two. Sometimes, it is considered quite expensive due to the fact that it uses only a little of the capacity of those drives.


The recovery process sometimes means getting RAID 0 from the member disks of the RAID 10 array. The first step of this should be to have a set of the disks making up RAID 0. To achieve this, there needs to be an exclusion of a disk from every pair. The set that results needs to contain N/2 disks. If there is less than this, you might not be able to fully perform the RAID 10 recovery. Sometimes the controller may fail but the disks will still be fine. In this case, you can resort to use a disk taken from every pair. Avoid the use of those disks that have been mechanically ruined. It is at this point, where you may proceed to perform recovery from the RAID 0. People have proceeded to perform RAID 10 recovery successfully in this manner.